EXPERIMENTAL INVESTIGATIONS ON THE TRANSIENT CRYOGENIC FLOW FEATURES OF A TYPICAL BALL VALVE UNDER LIQUID NITROGEN CHILLDOWN CONDITIONS
Abstract
In this paper, experimental result of cryogenic chilldown of ½” stainless steel cryogenic ball valve is reported. Experiments were done on horizontally placed test section. The test section is insulated by using nitrile rubber for reducing the heat inleak.LN2 is used as the working fluid. Liquid nitrogen is feed in to the test section by using external pressurization technique. Experiments were conducted for two sets of inlet supply pressure (7.5 psi and 12.5 psi).The mass flow rates obtained for two inlet pressures conditions are 2.292 g/s and 3.31 g/s. The experimental results show that the chilldown time of valve body is higher due to its high thermal mass and chilldown time decrease with increase in supply pressure at the inlet.
References
[3] Steiner D, Schlunder EU. Heat transfer and pressure drop for boiling nitrogen flowing in a horizontal tube: 1. Saturated flow boiling. Cryogenics1976;16(7):387–98. [4] J.C Burke et al . Pressurized cool down of cryogenic transfer lines . Advances in Cryogenic Engineering 1960; 4: 378-394. [5] J.C. Bronson, F.J. Edeskuty, J.H. Fretwell, E.F. Hammel, W.E. Keller, K.L. Meier, A.F. Schuch, W.L. Willis, Problems in cool-down of cryogenic systems, Adv. Cryog. Eng. 7 (1962) 198–205. [6] A Hedayatpour ., B. N. Antar., Cool down of a vertical line with liquid nitrogen”,Journal of Thermophysisc and Heat Transfer, 1993. [7] Krishnamurthy M.V., Rajneesh C., Jacob S.,Experimental studies on cool down and mass flow characteristics of a demountable liquid nitrogen transfer line, Cryogenics, 1996. [8] Jelliffe Jackson, Jun Liao., Transient heat transfer during cryogenic chill down , Proc. HT2005 ASME Summer Heat Transfer Conference, San Francisco ,California, 2005 [9] Yuan K., Ji. Y.,Chung J.N., Cryogenic chill down process under low flow rates, International Journal of Heat and Mass Transfer , 4011-4022, 2007 .
[10] Hong Hu., Jacob N. Chung., An experimental study on flow patterns and heat transfer characteristic during cryogenic chilldown in a vertical pipe, Cryogenics, 2012, 268-277. [11] Jijo Johnson .,S. R. Shine.,Transient cryogenic chilldown process in horizontal and inclined pipes, Cryogenics, 2015, 7-17.
[12] Jeswin Joseph ,Gagan Agarwal., “Chilldown study of turbopump bearing coolant cavity”, Conference paper,2015.
To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed. This form is intended for original material submitted to AJCT and must accompany any such material in order to be published by AJCT. Please read the form carefully.
The undersigned hereby assigns to the Asian Journal of Convergence in Technology Issues ("AJCT") all rights under copyright that may exist in and to the above Work, any revised or expanded derivative works submitted to AJCT by the undersigned based on the Work, and any associated written, audio and/or visual presentations or other enhancements accompanying the Work. The undersigned hereby warrants that the Work is original and that he/she is the author of the Work; to the extent the Work incorporates text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permission. See Retained Rights, below.
AUTHOR RESPONSIBILITIES
AJCT distributes its technical publications throughout the world and wants to ensure that the material submitted to its publications is properly available to the readership of those publications. Authors must ensure that The Work is their own and is original. It is the responsibility of the authors, not AJCT, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it.
RETAINED RIGHTS/TERMS AND CONDITIONS
1. Authors/employers retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors/employers may reproduce or authorize others to reproduce The Work and for the author's personal use or for company or organizational use, provided that the source and any AJCT copyright notice are indicated, the copies are not used in any way that implies AJCT endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Authors/employers may make limited distribution of all or portions of the Work prior to publication if they inform AJCT in advance of the nature and extent of such limited distribution.
4. For all uses not covered by items 2 and 3, authors/employers must request permission from AJCT.
5. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
INFORMATION FOR AUTHORS
AJCT Copyright Ownership
It is the formal policy of AJCT to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of AJCT, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others.
Author/Employer Rights
If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer as a work-for-hire. In that case, AJCT assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.
Reprint/Republication Policy
AJCT requires that the consent of the first-named author and employer be sought as a condition to granting reprint or republication rights to others or for permitting use of a Work for promotion or marketing purposes.
GENERAL TERMS
1. The undersigned represents that he/she has the power and authority to make and execute this assignment.
2. The undersigned agrees to indemnify and hold harmless AJCT from any damage or expense that may arise in the event of a breach of any of the warranties set forth above.
3. In the event the above work is accepted and published by AJCT and consequently withdrawn by the author(s), the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to AJCT will be destroyed.
4. For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent
for the others.
Licenced by :
Creative Commons Attribution 4.0 International License.