Emergency Patient Health Monitoring System Using IoT Sensors
Abstract
The IOT based wireless body sensors network has emerged as a new technology for e-healthcare that allows the data of a patient’s vital body parameters and movements to be collected by small wearable or implantable sensors and communicated using short-range wireless communication techniques. WBSN has shown great potential in improving healthcare quality, and thus has found a wide range of applications from ubiquitous health monitoring and computer assisted rehabilitation to emergency medical response systems. Internet of Things (IoT) enable humans to get higher level of automate by developing system using sensors, interconnected devices and Internet. Monitoring of critical Patient health is most important activity small delay in decision related to patient’s treatment may cause permanent disability or even death. Most of critical Patient are equipped with IOT sensors to measure health parameters, We are proposing IOT based system which can help to monitor the patient health & transfer patients health related Readings through fast communication and identifying emergency and initiate communication with healthcare staff and also helps to initiate proactive and quick treatment. This health care system reduces possibility of human errors, delay in communication and helps doctor to spare more time in decision with accurate observations.
Downloads
References
[2] Eleonora Borgia, “The Internet of Thigs vision: Key features, application and open issues”, Computer Communication, Vol.54, pp.131, 2014.
[3] https://www.elprocus.com/wp-content/uploads/2014/07/heartbeat-sensor.jpg
[4] Gennaro Tartarisco, Giovanni Baldus, Daniele Corda, Rossella Raso, Antonino Arnao, Marcello Ferro, Andrea Gaggioli, Giovanni Pioggia, “Personal Health System architecture for stress monitoring and support to clinical decisions”, Computer Communications Vol.35, pp.1296–1305, 2012.
[5] Franca Delmastro, “Pervasive communications in healthcare”, Computer Communications Vol.35, pp.1284–1295,2012.
[6] Tao Liu , Yoshio Inoue, Kyoko Shibata, “Development of a wearable sensor system for quantitative gait analysis”,
Measurement Vol. 42, pp.978–988, 2009.
[7] Stefano Abbate, Marco Avvenuti, Francesco Bonatesta, Guglielmo Cola, Paolo Corsini, Alessio Vecchio, “A smartphonebased fall detection system”, Pervasive and Mobile Computing Vol. 8,pp.883–899 , 2012.
[8] Mohammed Riyadh Abdmeziem, Djamel Tandjaoui, “An end-to-end secure key management protocol for e-health
applications”, Computers and Electrical Engineering Vol.44, pp.184-197, 2015.
[9] Eleonora Borgia, “The Internet of Things vision: Key features, applications and open issues”, Computer Communications Vol .54 ,pp. 1–31, 2014.
[10] Cristina Elena Turcua, Cornel Octavian Turcua, “Internet of Things as Key Enabler for Sustainable Healthcare Delivery” , Procedia - Social and Behavioral Sciences Vol. 73, pp. 251 – 256, 2013.
[11] Jieran Shi, Lize Xiong, Shengxing Li, Hua Tian, “Exploration on intelligent control of the hospital infection -the intelligent reminding and administration of hand hygiene based on the technologies of internet of things”, Journal of Translational Medicine, Vol.10., No.2, pp.55, 2012.
[12] M. Brian Blake, “An Internet of Things for Healthcare”, IEEE Internet Computing, pp.4-6,2015.
[13] Boyi Xu, Li Da Xu, , Hongming Cai, Cheng Xie, Jingyuan Hu, and Fenglin Bu,“Ubiquitous Data Accessing Method in IoT - Based Information System for Emergency Medical Services”,IEEE Transactions on Industrial Informatics, Vol.10, No.2,May [14] Long Hu, Meikang Qiu, Jeungeun Song, M.Shamim Hossain and Ahmed Ghoneim, “Software Defined Healthcare Networks”, IEEE Wireless Communications, Vol. 22 No. 6, pp. 67-75, December 2015.
To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed. This form is intended for original material submitted to AJCT and must accompany any such material in order to be published by AJCT. Please read the form carefully.
The undersigned hereby assigns to the Asian Journal of Convergence in Technology Issues ("AJCT") all rights under copyright that may exist in and to the above Work, any revised or expanded derivative works submitted to AJCT by the undersigned based on the Work, and any associated written, audio and/or visual presentations or other enhancements accompanying the Work. The undersigned hereby warrants that the Work is original and that he/she is the author of the Work; to the extent the Work incorporates text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permission. See Retained Rights, below.
AUTHOR RESPONSIBILITIES
AJCT distributes its technical publications throughout the world and wants to ensure that the material submitted to its publications is properly available to the readership of those publications. Authors must ensure that The Work is their own and is original. It is the responsibility of the authors, not AJCT, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it.
RETAINED RIGHTS/TERMS AND CONDITIONS
1. Authors/employers retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors/employers may reproduce or authorize others to reproduce The Work and for the author's personal use or for company or organizational use, provided that the source and any AJCT copyright notice are indicated, the copies are not used in any way that implies AJCT endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Authors/employers may make limited distribution of all or portions of the Work prior to publication if they inform AJCT in advance of the nature and extent of such limited distribution.
4. For all uses not covered by items 2 and 3, authors/employers must request permission from AJCT.
5. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
INFORMATION FOR AUTHORS
AJCT Copyright Ownership
It is the formal policy of AJCT to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of AJCT, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others.
Author/Employer Rights
If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer as a work-for-hire. In that case, AJCT assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.
Reprint/Republication Policy
AJCT requires that the consent of the first-named author and employer be sought as a condition to granting reprint or republication rights to others or for permitting use of a Work for promotion or marketing purposes.
GENERAL TERMS
1. The undersigned represents that he/she has the power and authority to make and execute this assignment.
2. The undersigned agrees to indemnify and hold harmless AJCT from any damage or expense that may arise in the event of a breach of any of the warranties set forth above.
3. In the event the above work is accepted and published by AJCT and consequently withdrawn by the author(s), the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to AJCT will be destroyed.
4. For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent
for the others.
Licenced by :
Creative Commons Attribution 4.0 International License.
